Installing SP2.x under Linux: Difference between revisions

Latest revision as of 10:18, 5 June 2019

These instructions apply to installs either using RPMs provided by the Shibboleth Consortium, or using native packages available in Debian/Ubuntu. See NativeSPLinuxInstall in the Shib Wiki for instructions on installing in other versions of Linux, and then adapt these instructions accordingly.

These instructions assume that your web server serves a single site - virtual hosting issues are addressed elsewhere.

Installation

RPMs

Currently (June 2012) the Shib Consortium provide RPMs for Red Hat Enterprise and CentOS 5, 6 (i386 and x86_64); SUSE Linux Enterprise Server 9, 10, 11, 11-SP1 (i386 and x86_64); and OpenSUSE Linux 11.0, 11.1, 11.2, 11.3, 11.4, 12.1 (i386 and x86_64).

Follow the instructions at https://wiki.shibboleth.net/confluence/display/SHIB2/NativeSPLinuxRPMInstall

to install an apropriate set of RPMs.

For SLES10 and zypper it's possible to use Yum repository by adding the appropriate repository with

zypper sa http://download.opensuse.org/repositories/security:/shibboleth/SLE_10/

after which the Shibboleth software can be installed with

zypper in shibboleth

Debian/Ubuntu

distro	release	package	version
Debian	6 Squeeze¹	libapache2-mod-shib2	2.3.1
Debian	7 Wheezy¹	libapache2-mod-shib2	2.4.3
Debian	8 Jessie¹	libapache2-mod-shib2	2.5.3
Debain	9 Stretch¹	libapache2-mod-shib2	2.6.0
Debain	10 Buster¹	libapache2-mod-shib	3.0.4
Ubuntu	10.04 Lucid	libapache2-mod-shib2	2.3.1
Ubuntu	11.04 Natty	libapache2-mod-shib2	2.3.1
Ubuntu	11.10 Oneric	libapache2-mod-shib2	2.4.3
Ubuntu	12.04 Precise	libapache2-mod-shib2	2.4.3
Ubuntu	12.10 Quantal	libapache2-mod-shib2	2.4.3
Ubuntu	16.04 Xenial	libapache2-mod-shib2	2.5.3
Ubuntu	18.04 Bionic²	libapache2-mod-shib2	2.6.1
Ubuntu	18.10 Cosmic	libapache2-mod-shib	3.0.2
Ubuntu	19.04 Disco	libapache2-mod-shib	3.0.4

In all cases, the distribution-supplied version of the SP software can be enabled via:

 a2enmod shib2

Then run shib-keygen to create a key and self-signed X.509 certificate for the Shibboleth SP to use:

 shib-keygen

The key is stored in /etc/shibboleth/sp-key.pem and the certificate in /etc/shibboleth/sp-cert.pem.

Notes

The backports repo contains the package from the next release.
The shibboleth packages in bionic still depend on libcurl3, while everything else in the distribution requires libcurl4 and they cannot both be installed. There are some workarounds detailed on the bug tracker. Manual compilation may be required.

Subsequent configuration

After installing the software, in /etc/shibboleth:

replace the supplied shibboleth2.xml and attribute-map.xml with Shibboleth2.xml - internal use skeleton and Attribute-map.xml - internal use skeleton respectively.
find all occurrences of 'FIX-ME' in the new shibboleth2.xml and replace them as directed in the adjacent comments (see Editing XML and EntityIDs for useful background).

Run (as root)

 /usr/sbin/shibd -t

and expect to see "overall configuration is loadable, check console for non-fatal problems". Fix any reported mistakes.

Start shibd (as root) with

 /etc/init.d/shibd start

or restart it if it's already running with

 /etc/init.d/shibd restart

[Note: "Starting shibd listener failed to enter listen loop" means that you were not root]. See /var/log/shibboleth/shibd.log for startup messages. The Shibboleth packages will have already set shibd to restart on boot.

(Re-)start Apache. In case of failure see /var/log/apache2/error_log

Before you can proceed any further you will need to register you SP, at least with the 'Ucam federation'. See SP registration for details.

Access http://<hostname>/secure/. You should be redirected to Raven to authenticate, be asked to accept release of your information, and then see a 404 error page from your server (because you have no content in the requested location). See /var/log/apache2/error_log, /var/log/shibboleth/shibd.log and /var/log/shibboleth/transaction.log for clues if something goes wrong. Feel free to create some content in /srv/www/htdocs/secure/ for a better demonstration.

Assuming this works, visit http://<hostname>/Shibboleth.sso/Session to check that attribute information is being released to your SP. You should see a page containing something like:

 Attributes
 ----------
 affiliation: member@cam.ac.uk;member@eresources.lib.cam.ac.uk
 entitlement: urn:mace:dir:entitlement:common-lib-terms
 eppn: fjc55@cam.ac.uk

along with other things.

You now have a web server running the Shibboleth SP software and protecting the content of http://<hostname>/secure/ by requiring an authenticated Raven login (by anyone). Where you go from here depends on what you want to do. Topics to consider include:

@@ Line 1: / Line 1: @@
-These instructions apply specifically to installs on SLES 10 using Internet2-supplied RPMs, which currently (March 2010) support CentOS 5, RHEL 4 and 5, SUSE Linux Enterprise Server 9, 10, 11, and OpenSUSE Linux 11.0 and 11.1), all in i386 and x86_64 versions. See [https://spaces.internet2.edu/display/SHIB2/NativeSPLinuxInstall NativeSPLinuxInstall] in the Internet2 Wiki for instructions on installing in other versions of Linux, and then adapt these instructions accordingly.
+These instructions apply to installs either using RPMs provided by the Shibboleth Consortium, or using native packages available in Debian/Ubuntu. See [https://wiki.shibboleth.net/confluence/display/SHIB2/NativeSPLinuxInstall NativeSPLinuxInstall] in the Shib Wiki for instructions on installing in other versions of Linux, and then adapt these instructions accordingly.
-Currently these instructions also assumes you are using the ''prefork'' version Apache - this may or may not all work with ''worker''. We also assume that your web server serves a single site - [[Virtual hosting issues with Shibboleth | virtual hosting issues]] are addressed later.
+These instructions assume that your web server serves a single site - [[Virtual hosting issues with Shibboleth | virtual hosting issues]] are addressed elsewhere.
-Download and install the apropriate RPMs from OpenSUSE project's Build Service at http://download.opensuse.org/repositories/security://shibboleth/. Download and install the latest RPM for each of the following (you can ignore devel, debuginfo, or docs packages):
+==Installation==
- log4shib
+===RPMs===
- xerces-c
- xml-security-c
- xmltooling
- opensaml
- shibboleth
-and any of their dependencies. The Build Service will act as a Yum repository, allowing various package managers to interact with it directly. Details vary between distributions and package managers, but for SLES10 and <tt>zypper</tt> the apropriate repository can be added with
+Currently (June 2012) the Shib Consortium provide RPMs for Red Hat Enterprise and CentOS 5, 6 (i386 and x86_64); SUSE Linux Enterprise Server 9, 10, 11, 11-SP1 (i386 and x86_64); and OpenSUSE Linux 11.0, 11.1, 11.2, 11.3, 11.4, 12.1 (i386 and x86_64).
+Follow the instructions at https://wiki.shibboleth.net/confluence/display/SHIB2/NativeSPLinuxRPMInstall
+to install an apropriate set of RPMs.
+For SLES10 and <tt>zypper</tt> it's possible to use Yum repository by adding the appropriate repository with
   zypper sa http://download.opensuse.org/repositories/security:/shibboleth/SLE_10/
@@ Line 20: / Line 21: @@
   zypper in shibboleth
-Further information on configuring package manages can be found [https://spaces.internet2.edu/display/SHIB2/NativeSPLinuxRPMInstall here] and [http://en.opensuse.org/Build_Service/User here].
+===Debian/Ubuntu===
+<!-- See http://www.debian.org/distrib/packages and search for 'shib' in all distributions for help updating this-->
+<!-- See http://packages.ubuntu.com/ and search for 'shib' in all distributions for help updating this-->
+{| class="wikitable"
+! distro !! release !! package !! version
+|-
+| Debian || 6 Squeeze<sup>1</sup> || libapache2-mod-shib2 || 2.3.1
+|-
+| Debian || 7 Wheezy<sup>1</sup>  || libapache2-mod-shib2 || 2.4.3
+|-
+| Debian || 8 Jessie<sup>1</sup> || libapache2-mod-shib2 || 2.5.3
+|-
+| Debain || 9 Stretch<sup>1</sup> || libapache2-mod-shib2 || 2.6.0
+|-
+| Debain || 10 Buster<sup>1</sup> || libapache2-mod-shib || 3.0.4
+|-
+| Ubuntu || 10.04 Lucid || libapache2-mod-shib2 || 2.3.1
+|-
+| Ubuntu || 11.04 Natty || libapache2-mod-shib2 || 2.3.1
+|-
+| Ubuntu || 11.10 Oneric || libapache2-mod-shib2 || 2.4.3
+|-
+| Ubuntu || 12.04 Precise || libapache2-mod-shib2 || 2.4.3
+|-
+| Ubuntu || 12.10 Quantal || libapache2-mod-shib2 || 2.4.3
+|-
+| Ubuntu || 16.04 Xenial || libapache2-mod-shib2 || 2.5.3
+|-
+| Ubuntu || 18.04 Bionic<sup>2</sup> || libapache2-mod-shib2 || 2.6.1
+|-
+| Ubuntu || 18.10 Cosmic || libapache2-mod-shib || 3.0.2
+|-
+| Ubuntu || 19.04 Disco || libapache2-mod-shib || 3.0.4
+|}
+In all cases, the distribution-supplied version of the SP software can be enabled via:
+  a2enmod shib2
+Then run shib-keygen to create a key and self-signed X.509 certificate for the Shibboleth SP to use:
+  shib-keygen
+The key is stored in /etc/shibboleth/sp-key.pem and the certificate in /etc/shibboleth/sp-cert.pem.
+==== Notes ====
+# The backports repo contains the package from the next release.
+# The shibboleth packages in bionic still depend on libcurl3, while everything else in the distribution requires libcurl4 and they cannot both be installed. There are some workarounds detailed on the [https://bugs.launchpad.net/ubuntu/+source/xmltooling/+bug/1776489 bug tracker]. Manual compilation may be required.
+==Subsequent configuration==
 After installing the software, in /etc/shibboleth:
@@ Line 32: / Line 82: @@
 Start shibd (as root) with
    /etc/init.d/shibd start
-[Note: "Starting shibd listener failed to enter listen loop" means that you were not root]. See /var/log/shibboleth/shibd.log for startup messages. The Shibboleth RPM will have already set shibd to restart on boot.
+or restart it if it's already running with
+  /etc/init.d/shibd restart
+[Note: "Starting shibd listener failed to enter listen loop" means that you were not root]. See /var/log/shibboleth/shibd.log for startup messages. The Shibboleth packages will have already set shibd to restart on boot.
 (Re-)start Apache. In case of failure see /var/log/apache2/error_log
+Before you can proceed any further you will need to register you SP, at least with the 'Ucam federation'. See [[SP registration]] for details.
 Access <nowiki>http://<hostname>/secure/</nowiki>. You should be redirected to Raven to authenticate, be asked to accept release of your information, and then see a 404 error page from your server (because you have no content in the requested location). See /var/log/apache2/error_log, /var/log/shibboleth/shibd.log and /var/log/shibboleth/transaction.log for clues if something goes wrong. Feel free to create some content in /srv/www/htdocs/secure/ for a better demonstration.
@@ Line 45: / Line 99: @@
    entitlement: urn:mace:dir:entitlement:common-lib-terms
    eppn: fjc55@cam.ac.uk
+along with other things.
 You now have a web server running the Shibboleth SP software and protecting the content of <nowiki>http://<hostname>/secure/</nowiki> by requiring an authenticated Raven login (by anyone). Where you go from here depends on what you want to do. Topics to consider include:
-* [[SP registration]]
 * [[SSL, certificates and security with Shibboleth|Using SSL and certificates]]
 * [[Configuring Shibboleth access control|Configuring access control]]
 * [[Shibboleth access control using Apache configuration files | Using Apache configuration files]]
 * [[Virtual hosting issues with Shibboleth|Virtual hosting issues]]

Installing SP2.x under Linux: Difference between revisions

Latest revision as of 10:18, 5 June 2019

Contents

Installation

RPMs

Debian/Ubuntu

Notes

Subsequent configuration

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools