Service Desk Knowledgebase: Networking: Difference between revisions

From Computer Laboratory System Administration
Jump to navigationJump to search
Line 145: Line 145:
# On the '''wiring trace page''' you should see a four line trace for a connection in the floor box.  Click on '''Delete All'''.
# On the '''wiring trace page''' you should see a four line trace for a connection in the floor box.  Click on '''Delete All'''.


The wiring database is now updated.  The '''VLAN''' that was on that port should now be removed '''no switch port access plan nnn'''
The wiring database is now updated.  The '''VLAN''' that was on that port should now be removed '''no switch port access vlan nnn'''


== Contacts ==
== Contacts ==

Revision as of 16:56, 20 January 2015


This is the Networking content page of the CL Wiki Service Desk Knowledgebase. Its purpose is to provide information to the Service Desk team on how to handle problems and requests about this CL service. If you are involved with the provision of this CL service please feel free to add to the knowledge about that it.

If CL staff need to tell the Service Desk team about problems with this service please email
sys-admin-aside@cl.cam.ac.uk.

Return to the Service Desk Knowledgebase SERVICE PORTFOLIO

Key Service Description & URLs

CL Customer Documentation

William Gates Building Floor Plans (inc. Room Codes):

VLANs

Further CL Sys-Admin Resources

Underpinning Services

  • ??? - Any supporting or underpinning services

Customer-base for this Service

  • All staff and students of the Computer Laboratory

Costs

  • Free to all current staff and PhD students of the Computer Laboratory.

SLA

  • N/A

Service Desk Call Handling Procedure

  • RT tickets can be escalated to the net-admin team by changing the Queue to net-admin with the Owner set to Nobody & Status set to new. Tell the requestor:
    I am passing this request over to our Network Admin team who, I'm sure, will be in contact shortly.

Dealing with a VPN request

See http://www.wiki.cl.cam.ac.uk/rowiki/SysInfo/HelpDesk/Networking/VPN_request

Request to add machine to department network

If it is a private laptop then get them to register it at the DHCP request page and request a connection on the appropriate VLAN.

Adding IP addresses & CNAMES

1. Check that the person is entitled to what is being requested using
https://dbwebserver.ad.cl.cam.ac.uk/administration/HR/HRList.aspx

2. Determine the IP address range that should be use for a given requested VLAN using
https://dbwebserver.ad.cl.cam.ac.uk/SCG/Networks/Networks.aspx

3. Make sure Pageant.EXE is running and has your private key by double clicking on CL.ppk or similar.

4. Use PuTTY and go to the CL's ssh-remote-0.cl.cam.ac.uk

5. Make the PuTTY window longer.

6. Type kinit & press [Enter]

7. Enter your CL Password for CRSid@AD.CL.CAM.AC.UK & press [Enter]

8. Type ssh -K laira & press [Enter] to go to the privileged machine laira

7. Give your CL [sudo] password for CRSid: & press [Enter]

9. At the laira:~$ prompt use cd /anfs/glob/src/etc/named/src and [Enter]

10. Check-out the cl.data file with co -l cl.data and [Enter]

11. Use vi to edit the file with vi cl.data and [Enter]

Adding an IP Address:

  • Search for the start of the address range with something like /128.232.98.1 and [Enter]
  • Ctrl+F to scroll Forward to the next available address in the range.
  • Down-arrow to start of line above where it should be.
  • Use Shift+A to enter --INSERT-- mode
  • Make an entry like:
 saluki1.dtg     IN      A       128.232.98.206
                 IN      TXT     "RT#94231"

(NOTE: the gaps made using <Tab> not space)

  • [Esc] out of INSERT mode
  • :wq and [Enter] to write the file and quit vi

Adding a CNAME:

  • Search for the machine name using something like /puppy38 and [Enter]
  • Down-arrow to start of line above where it should be.
  • Use Shift+A to enter --INSERT-- mode
  • Make an entry like:
 puppy38.dtg     IN      A       128.232.20.67
                 IN      TXT     "VM in husky cluster"   ; oc243 rt#88303
 acr31-containers.dtg IN CNAME   puppy38.dtg     ; rt#91603
 rscfl-freebsd.dtg IN    CNAME   puppy38.dtg     ; rt#94176

(NOTE: the gaps made using <Tab> not space)

  • [Esc] out of INSERT mode
  • :wq and [Enter] to write the file and quit vi

GENERAL NOTES on vi

  • /string and [Enter] (search for the string)
  • : = command
  • :w and [Enter] is write
  • :q! and [Enter] = quit without writing (if you mess up!)
  • :help and [Enter] for help
  • Arrow-keys scroll around text
  • Ctrl+F to page-down scroll through text
  • Shift+A to go into --INSERT-- mode
  • [Esc] escape out of --INSERT-- mode

12. rcsdiff cl.data and [Enter] to check what changes have actually been made

13. Use ci -u cl.data and [Enter] to check-in and add a comment of the RT ticket number e.g. RT #94171 then [Enter] and exit with .[Enter]

14. Go up with cd .. and [Enter]

15. Use make install and [Enter] (give your CL [sudo] password for CRSid: & press [Enter] if required)

16. Use exit and [Enter] to close down PuTTY

17. In RT reply to the user and resolve the ticket.

Procedure for patching is

The patches are documented in the database. All physical cables on the patch panels should be documented. For patches for telephones only the patch should have a comment in it which has Telephone at the start. All other patches will also have a connection to a physical machine as well.

Adding a patch

  1. Go to the floorbox page and enter the box name (somethings like WC2E-012 - note box number always ends with 3 digits) and press [Enter]
  2. If no connection shows up for the port you plan to use press Add connection
  3. On the AddConnection page add in the port number (between 1 and 4, phones usually are in port 1) and the machine inventory number. Then click on create.
  4. You will be taken back to the floor box page. Click on trace by the connection you have just added.
  5. On the wiring trace page you should see a single line for a connection in the floor box. Click on Add Patch.
  6. You will then be on the Add Patch page. Enter the other end of the patch in the form HOST-012 (note use 3 digits with preceding zeros for the last part of the host port. Click on create

The wiring database is now completely updated. The VLAN now needs to be configured for that port.

Removing a patch

  1. Go to the floorbox page and enter the box name (somethings like WC2E-012 - note box number always ends with 3 digits) and press [Enter]
  2. Click on trace by the connection you have just added.
  3. On the wiring trace page you should see a four line trace for a connection in the floor box. Click on Delete All.

The wiring database is now updated. The VLAN that was on that port should now be removed no switch port access vlan nnn

Contacts

Primary

Other

Availability

  • Monday:
  • Tuesday:
  • Wednesday:
  • Thursday:
  • Friday:
  • Saturday: Closed
  • Sunday: Closed

Hints, Tips & Known Issues

Title Person (Date)

Categorising Keywords

  • Network Networking VPN Router
Retrieved from "https://wiki.cam.ac.uk/wiki/cl-sys-admin/index.php?title=Service_Desk_Knowledgebase:_Networking&oldid=987"